| Chapter 1 - General |
| |
Regulation 1 |
Definitions |
| |
Regulation 2 |
Applications |
| |
Regulation 3 |
Exemptions and waivers |
| |
Regulation 4 |
Exceptions |
| |
Regulation 5 |
Equivalents |
| Chapter 2 - Surveys and certification |
| |
Regulation 6 |
Surveys |
| |
Regulation 7 |
Issue or endorsement of a Certificate |
| |
Regulation 8 |
Issue or endorsement of a Certificate by another Government |
| |
Regulation 9 |
Form of Certificate |
| |
Regulation 10 |
Duration and validity of Certificate |
| |
Regulation 11 |
Port State control on operational requirements |
| Chapter 3 - Requirements for machinery spaces
of all ships |
| Part A - Construction |
| |
Regulation 12 |
Tanks for oil residues (sludge) |
| |
Regulation 13 |
Standard discharge connection |
| Part B - Equipment |
| |
Regulation 14 |
Oil filtering equipment |
| Part C - Control of operational discharge of
oil |
| |
Regulation 15 |
Control of discharge of oil |
| |
A: Discharges outside special areas
B: Discharges in special areas
C: Requirements for ships of less than 400 gross tonnage
in all areas except the Antarctic area
D: General requirements
|
| |
Regulation 16 |
Segregation of oil and water ballast and carriage of oil
in forepeak tanks |
| |
Regulation 17 |
Oil Record Book, Part I - Machinery space operations |
| Chapter 4 - Requirements for the cargo areas
of oil tankers |
| Part A - Construction |
| |
Regulation 18 |
Segregated ballast tanks |
| |
Regulation 19 |
Double hull and double bottom requirements for oil tankers
delivered on or after 6 July 1996 |
| |
Regulation 20 |
Double hull and double bottom requirements for oil tankers
delivered before 6 July 1996 |
| |
Regulation 21 |
Prevention of oil pollution from oil tankers carrying heavy
grade oil as cargo |
| |
Regulation 22 |
Pump-room bottom protection |
| |
Regulation 23 |
Accidental oil outflow performance |
| |
Regulation 24 |
Damage assumptions |
| |
Regulation 25 |
Hypothetical outflow of oil |
| |
Regulation 26 |
Limitations of size and arrangement of cargo tanks |
| |
Regulation 27 |
Intact stability |
| |
Regulation 28 |
Subdivision and damage stability |
| |
Regulation 29 |
Slop tanks |
| |
Regulation 30 |
Pumping, piping and discharge arrangement |
| Part B - Equipment |
| |
Regulation 31 |
Oil discharge monitoring and control system |
| |
Regulation 32 |
Oil/water interface detector |
| |
Regulation 33 |
Crude oil washing requirements |
| Part C - Control of operational discharge of
oil |
| |
Regulation 34 |
Control of discharge of oil |
| |
A: Discharges outside special areas
B: Discharges in special areas
C: Requirements for oil tankers of less than 150 gross tonnage
D: General requirements
|
| |
Regulation 35 |
Crude oil washing operations |
| |
Regulation 36 |
Oil Record Book, Part II - Cargo/ballast operations |
| Chapter 5 - Prevention of oil pollution arising
from an oil pollution incident |
| |
Regulation 37 |
Shipboard oil pollution emergency plan |
| Chapter 6 - Reception facilities |
| |
Regulation 38 |
Reception facilities |
| Chapter 7 - Special requirements for fixed or
floating platforms |
| |
Regulation 39 |
Special requirements for fixed or floating platforms |
| Appendices to Annex I |
| |
Appendix I |
List of oils. |
| |
Appendix II |
Form of IOPP Certificate and Supplements |
| |
Appendix III |
Form of Oil Record Book |
| |
Unified Interpretations of Annex I |
|
| Appendices to Unified Interpretations of Annex
I |
| |
Appendix 1 |
Guidance to Administrations concerning draughts recommended
for segregated ballast tankers below 150 m in length |
| |
Appendix 2 |
Interim recommendation for a unified interpretation of regulations
18.12-18.15 ''Protective location of segregated ballast spaces'' |
| |
Appendix 3 |
Connection of small diameter line to the manifold valve |
| |
Appendix 4 |
Specifications for the design, installation and operation
of a part flow system for control of overboard discharges |
| |
Appendix 5 |
Discharges from fixed or floating platforms |